Products

PWR-01 Series -NEW-

Compact Wide Range DC Power Supply(CV/CC) : 16 Models



Outline

The PWR-01 is a series of high performance, multifunctional, compact, wide-range DC power supplies. It consists of 16 models in total with 4 maximum voltage outputs (L, ML, MH, and H) and 4 maximum power outputs (400 W, 800 W, 1200 W and 2000 W). The series is equipped with LAN (LXI), USB, and RS232C as standard interfaces that are essential for system integration. The PWR-01 also features front-facing output terminals, variable internal resistance, bleeder ON/OFF functions, CC/CV priority switching function, synchronized operation, various protections, and programmable internal memory.

Features

  • Sequence function (supports triggered synchronization)
  • Variable internal resistance function
  • LAN (LXI compliant) /USB/RS232C as standard interface
  • A virtual multi-channel bus (VMCB) function makes multi-channel operation more efficient
  • A wide range of voltage and current settings can be combined within its output power rating (3 to 4 times)
  • All models are equipped with front-facing output terminals as standard (maximum 10A)
  • Supporting universal input voltage (85V to 265V)
  • CONFIG setting shortcut function and display (Up to three parameters can be registered.)
  • Setting preset memory function (3 combinations of settings for voltage, current, OVP, OCP, and UVL)
  • Bleeder (sink) can be turned on/off, with an even stronger bleeder mode setting available
  • Output-on/off delay function
  • Soft start/stop function

Lineup

Model Specification
PWR401L Photo
Manual...
400W, 0 to 40V/0 to 40A
PWR401ML Photo
Manual...
400W, 0 to 80V/0 to 20A
PWR401MH Photo
Manual...
400W, 0 to 240V/0 to 5A
PWR401H Photo
Manual...
400W, 0 to 650V/0 to 1.85A
PWR801L Photo
Manual...
800W, 0 to 40V/0 to 80A
PWR801ML Photo
Manual...
800W, 0 to 80V/0 to 40A
PWR801MH Photo
Manual...
800W, 0 to 240V/0 to 10A
PWR801H Photo
Manual...
800W, 0 to 650V/0 to 3.7A
PWR1201L Photo
Manual...
1200W, 0 to 40V/0 to 120A
PWR1201ML Photo
Manual...
1200W, 0 to 80V/0 to 60A
PWR1201MH Photo
Manual...
1200W, 0 to 240V/0 to 15A
PWR1201H Photo
Manual...
1200W, 0 to 650V/0 to 5.55A
PWR2001L Photo
Manual...
2000W, 0 to 40V/0 to 200A
PWR2001ML -NEW- Photo
Manual...
2000W, 0 to 80V/0 to 100A
PWR2001MH -NEW- Photo
Manual...
2000W, 0 to 240V/0 to 25.0A
PWR2001H -NEW- Photo
Manual...
2000W, 0 to 650V/0 to 9.25A
 

Options (Related products)

Wavy for PWR-01 (SD027-PWR-01)
Wavy for PWR-01 (SD027-PWR-01)
Sequence Creation Software
Sequence Creation Software for PWR-01 series

OP01-PWR-01
OP01-PWR-01
J1/ J2 connector plug kit
A plug kit for externally controlling the PWR-01 through the J1/ J2 connector. 30 pin pieces. Housing for the J1 connector and J2 connector, 1 piece each.



OP02-PWR-01
OP02-PWR-01
Parallel operation cable
Parallel operation cable for PWR-01 Series (for 2 units in parallel)



OP03-PWR-01
OP03-PWR-01
External control cable and connector set
Cables 20 pcs., length: approx. 500 mm (Crimped on one end)
Housing for the J1 connector and J2 connector: 1 piece each, Core: 1 piece



PIA5100
PIA5100
GPIB converter
Interface converter providing GPIB functionality through RS232C or USB interface for Kikusui measurement devices and power supplies without GPIB installed. [Accessories: 5 Vdc power cord set, magnetic sheet]



AC5.5-3P3M-M4C-VCTF
AC5.5-3P3M-M4C-VCTF
1500W AC cord (PWX series / PWR-01 series)
Max. 1500 W AC power cord (total length 3 m)



AC5.5-1P3M-M6C-3S
Input power cable
3 single-core cables 5.5 mm2 Length: 3 m M6(for PCR1000WE(Single-phase 2-wire), PCR2000WE(Single-phase 2-wire))



TL41
TL41
Safety plug (connection by the screw)
Safety plug (connection by the screw), Red / Black 1pc. Each 1000V/ CATⅡ max 32A



TL42
TL42
Safety plug (connection by the solder)
Safety plug (connection by the solder), Red / Black 1pc. Each 1000V/ CATⅡ max 32A



RD-8P/9P
RD-8P/9P
RS232C control conversion cable
RS232C control conversion cable Dsub9P to RJ45



TU01-PWR-01
TU01-PWR-01
Terminal Unit
A terminal unit for converting the J1 and J2 connectors of this product to the J1 connector of the Kikusui PWR Series Regulated DC Power Supplies.
*Output voltage (current) external resistance control and one-control parallel operation (series operation) cannot be converted.



KRA3
Rack Adapter
Rack adapter (Inch size) *Applicable series name: PWR(01), PAS, PMR, PMP, PAK-A, PMC, PMC-A, PMX-A, PMX-Multi, PCR500M(MA), PLZ-205/405W, PLZ-4W/4WL/4WH, PLZ-3W/3WH, PIA4800

KRA150
Rack Adapter
Rack adapter (Metric size) *Applicable series name: PWR(01), PAS, PMR, PMP, PAK-A, PMC, PMC-A, PMX-A, PMX-Multi, PCR500M(MA), PLZ-205/405W, PLZ-4W/4WL/4WH, PLZ-3W/3WH, PIA4800

KRB3-TOS
Bracket
Bracket (Inch size) for TOS9200, TOS9201, TOS8870A, PAM(2kW type), PCR1000M(MA), PLZ1205W, PLZ-4W/4WH, PWR, PAT, PBZ, PCR1000WE, PCR2000WE, PCR3000WE2, TOS9300, TOS9301, TOS9302, TOS9303, TOS9303LC

KRB150-TOS
Bracket
Bracket (Metric size) for TOS9200, TOS9201, TOS8870A, PAM(2kW type), PCR1000M(MA), PLZ1205W, PLZ-4W/4WH, PWR, PAT, PBZ, PCR1000WE, PCR2000WE, PCR3000WE2, TOS9300, TOS9301, TOS9302, TOS9303, TOS9303LC